, contains 13 engineering challenges. Here is an outline of the Vernier and LEGO equipment required for the projects: Vernier Equipment To perform all of......
Some power supplies may make a high-pitched sound when connected and in use. This is not dangerous, only a sign that the coils or capacitors......
Ion-Selective Electrodes require careful use. The following are some general tips to keep in mind that will supplement the information found in the probe booklet......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Check the readings in the standards. The high should be around 1000 mg/L. The low should be around......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Check the readings in the standards. The high should be around 1000 mg/L. The low should be around......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Check the readings in the standards. The high should be around 1000 mg/L. The low should be around......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Connect an ion selective electrode to the amplifier and connect the amplifier to your platform. Start the data-collection......
Specifications and User Guide TROUBLESHOOTING – Primary Test: It should read approximately 4 in its storage solution. – Secondary Test: Take readings in fresh buffers,......
The clip is designed to hold the in place when using the . The sensor rests on this clip and rotates with the shaft to......
The with the relies on the use of a for data collection. Remove the beam from the Go Direct Centripetal Force Apparatus and slide Go......