If you are using older probes, with DIN-BTA adapters (non-AutoID), you can get confused by changes we made in our Physics with Computers book. In early versions of Lab 25......
...high in still air. Even gently moving air will reduce this error significantly. See also: What is the difference between the microphone built into the LabQuest and the MCA-BTA microphone?......
...connector. On LabPro, the analog output signal comes from the CH4 BTA connector. – LabQuest has a much wider range of frequencies, 0.25 to 10,000 Hz. LabPro is limited to......
The black thumbscrews shipped with DFS-BTA units are just short enough to allow Mass for Dynamics Cart (MASS), to be attached to the cart at the same time as the......
...(BTA) channel on an original CBL. For all other TI and Vernier Interfaces (e.g., CBL 2, LabPro, TI-Nspire Lab Cradle, LabQuest, and SensorDAQ) you will need to connect the photogate(s)......
Go!Link (GO-LINK) Product Overview What sensors do not work with Go!Link? Do Go! devices work with the LabQuest App? Can I use Go! devices with TI-84 Plus or TI-Nspire calculators......
...data collection with Go! devices on my G4 or G5 Mac. Why doesn't my TCA-BTA work with Logger Pro or Logger Lite? Logger Pro and Logger Lite need Mac OS......
...Pro 3.8.2 produces some potentially confusing dialogs that must be correctly navigated to achieve the desired setup. There may be changes in future versions of Logger Pro. *Use the BTA......
In most cases it is not necessary to calibrate sensors; however, for optimum accuracy you may choose to perform a calibration. To perform any calibration, you will need one or......
...systems. Keep in mind that it is a free to upgrade Logger Pro 3 to the latest version and Logger Lite is free. Sensors with order code ending in BTA......