Vernier sells Grommets for CO2 Gas Sensor (CO2-GROM) that can be used to insert a CO2 Gas Sensor (CO2-BTA), O2 Gas Sensor (O2-BTA), Go Direct® CO2 Gas Sensor (GDX-CO2) or......
Tech Support Search
...same way. Use Photogate (VPG-BTD) or Go Direct® Photogate (GDX-VPG) to measure angular speed. Either mounts to the Photogate Bracket preinstalled on the bottom of the CFA frame near the......
...Data-collection with computers or Chromebooks: If you are looking to support wired (BTA and BTD) sensors and you have a computer or Chromebooks at each lab station, then LabQuest Mini......
...I generate a clean sine wave sound output from a LabQuest? What is the difference between the microphone built into the LabQuest and the MCA-BTA microphone? Using LabQuest with a......
...second. The default sampling rate for the Hand-Grip Heart Rate Monitor (HGH-BTA) and Exercise Heart Rate Monitor (EHR-BTA) is 25 samples / seconds. 2 samples / second is much too......
...S-15826 Apply one piece of tape with hooks to the EKG Sensor (EKG-BTA), then place the corresponding piece of tape with loops to the stationary arm of the Goniometer (GNM-BTA).......
...UVA Sensor (UVA-BTA). This is because you will find more UVA-emitting sources available than UVB-emitting sources. If you can be outdoors and want look at the more sunburn-inducing radiation, choose......
3.-volt Arduinos are a poor choice to use with our wired sensors. Our wired, BTA and BTD, sensors require 5.0 volt power supply in almost all cases. The 3-volt Arduino......
...“Dual-Channel Amplifier”. As long as you have the whole system, the Dual-Channel Amplifier will connect to modern interfaces using two DIN to BTA Adapter (DIN-BTA) adapters. Note that the the......
...Detector model do I have? Which Oxygen Gas Sensor (O2-BTA) do I have? Which CO2 Gas sensor (CO2-BTA) do I have? What model Colorimeter do I have? How old is......