The real question is: Is the black connector on the Power Amplifier (PAMP) connected electrically to the black lead of a VP-BTA ? The answer......
The Vernier GPS and LabQuest 2 internal GPS both use WGS84. This cannot be changed. See http://en.wikipedia.org/wiki/World_Geodetic_System for an explanation of this particular GPS datum.......
When some versions of the Vernier GPS dongle are connected to a Mac running OS X 10.6, a spurious dialog is generated, reading A new......
Here is how to make an adapter for using the Pasco Power amplifier (CI-6552A)with the analog output of LabPro on CH4. Make the following connection......
This is a Windows-only problem. Logger Pro requires Bluetooth radios that use the Microsoft driver. Some third-party drivers will allow Logger Pro to see the......
The most important information that you can get about how to write programs for LabPro is the LabPro Technical Reference Manual, which is a free......
If you want to build your own sensors, connect Vernier sensors to your own interface or build your own cables, extensions, interfaces, or adapters. Here......
Yes, will fit PASCO tracks. As shipped, the mounting screws and nuts are positioned to fit the Vernier track. You’ll see a secondary pair of......
Our Power Amplifier will not be automatically recognized by either LabQuest App or Logger Pro. To use it and control the output you need to......
Logger Lite will display the message “No Device Connected” or “no sensors detected” when a device such as a Go!Temp or LabQuest cannot be found.......