Live readouts in Logger Pro sometimes make it difficult to create meters that work after a run is complete. For example, if you create a......
This is possible in the graph screen. 1. Go to the graph tab on your LabQuest. 2. Tap the Y-axis label (Absorbance) and select to......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Confirm that the gain setting on the sensor is appropriate for the device connected to the Instrumentation Amplifier.......
All Texas Instruments software is distributed through electronic download only. Information for user-account set up (required to use the software) is emailed to the end......
Our TCA-BTA and GDX-TC thermocouples use a type-K thermocouple wire. We sell a replacement wire for use on these thermocouples as . The wire is......
This has been reported on Windows computers running Logger Pro 3.5 to 3.8.2. Logger Lite 1.5 is also affected. Earlier versions of Lite may also......
The white-light LED in the performs several functions. It is most often used to illuminate the luminous light source for imaging experiments. When used for......
– The short answer is: Maybe, but probably not. (please see the details below) – There are two USB4000 models: USB4000 VIS-NIR and USB4000 UV-VIS......
Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water......
Motion Detectors do not provide the best measurement of the acceleration due to gravity. If that is your goal, we recommend using a Photogate and......