• Store
  • Downloads
  • Support
  • My Account
Technical Information Library
  • Grade Levels
    • Higher Education
    • High School
    • Middle School
    • Elementary School
  • District Solutions
  • Products
    • Shop All Products
    • Sensors
    • Software
    • Vernier Connections
    • Lab Books
    • Lab Equipment
    • Interfaces
    • Packages
    • How to Order
    • Catalog
  • Professional Development
    • Personalized Request
    • Webinars
  • Resources
    • The Vernier Blog
    • Experiments
    • White Papers
    • Videos
    • Grants & Awards
    • Product Manuals
    • Safety Data Sheets
Menu

What does the illumination value on the Polarimeter mean and what are its units?

  • January 13, 2012
  • 0
The illumination value is a measure of the light, originating from the LED source, that reaches the light detector. The illumination value is reported in relative units because all the measurements made with the Polarimeter are made in reference to a...
Continue Reading →

Do you have experiments written for the Polarimeter?

  • January 11, 2012
  • 0
Yes! We have made example experiments available, free of charge. If you are using the Chemical Polarimeter, those experiments can be downloaded here. If you are using the Go Direct Polarimeter, those experiments can be downloaded here. Both versions...
Continue Reading →

What is the sample volume required by your Polarimeter?

  • January 10, 2012
  • 0
The standard in polarimetry is to use a 10 cm pathlength which is approximately 25 mL in our sample cell. However, because it is not always feasible to have this large a sample volume, you can accurately take readings with sample heights lower than 1...
Continue Reading →

Can I play and analyze video files from DVDs, YouTube, or other web sites in Vernier Video Analysis or Logger Pro?

  • December 29, 2011
  • 0
Short Answer This is a bit of a gray area. The short answer is "If the video can be loaded and played in Vernier Video Analysis or Logger Pro, then you can use the analysis tools to analyze the video." Long Answer The long answer is tha...
Continue Reading →

Will LabQuest print to the HP LaserJet P2035/P2035n?

  • December 20, 2011
  • 0
This information pertains to the original LabQuest and LabQuest 2. If you have a LabQuest 3, see this article. Before following these instructions to add the driver for the HP LaserJet P2035 or HP LaserJet P2035n, your LabQuest version must be 1...
Continue Reading →

Why doesn’t the meter on the front of the Digital Radiation Monitor more closely match the software?

  • December 6, 2011
  • 0
The meter on the sensor reports count rate in various units such as counts per second, but our software reports total counts during each time interval, not count rate. The units displayed in Logger Pro thus are "counts" and not, for example, counts p...
Continue Reading →

Can I adjust the frame rate used in video analysis in Logger Pro?

  • December 5, 2011
  • 0
Yes, you can scale the time to effectively adjust the frame rate. Logger Pro uses the frame rate actually marked on the video. If the frame rate needs adjustment, it is marked incorrectly in the video. Logger Pro 3.8.2 and newer allow you to overrid...
Continue Reading →

Vernier Circuit Board (original model) Troubleshooting and FAQs

  • November 22, 2011
  • 0
Vernier Circuit Board (VCB, discontinued) Specifications and User Guide TROUBLESHOOTING - Primary Test: Check for physical defects. Check for proper power supply. There is also a resettable fuse located to the right of switch SW1. This fuse li...
Continue Reading →

Why don’t the absorbance readings for the colorimeters and spectrometers have units?

  • November 18, 2011
  • 0
Absorbance is a unitless measure of the amount of light of a particular wavelength that passes through a volume of liquid, relative to the maximum possible amount of light available at that wavelength. Absorbance readings are unitless because the...
Continue Reading →

Does the Digital Radiation Monitor work with the TI-Nspire Lab Cradle?

  • November 1, 2011
  • 0
The Digital Radiation Monitor (discontinued), can be used the TI-Nspire Lab Cradle , but only if the correct cable is used. Until June 2011, Digital Radiation Monitors were shipped with a cable that will not work with the the Lab Cradle. Updated ...
Continue Reading →
  • «
  • 1
  • ...
  • 195
  • 196
  • 197
  • 198
  • 199
  • ...
  • 229
  • »
 
  • ©2025 All rights reserved
  • Privacy Policy | Cookie Policy | Legal Center | Doing Business with Us
By using this site, you agree to our use of cookies to improve your experience. Learn more in our Privacy Policy.
You can revoke your consent any time using the Revoke consent button.