This is a general Windows error code that is most likely not specific to Logger Pro. It indicates that a problem will occur when trying......
Pyranometer (PYR-BTA)Specifications and User Guide TROUBLESHOOTING-Primary Test: Make sure that the sensor detects sunlight. A bright sunny day should approach a thousand Watts/square meter in......
There is no exact conversion factor. The problem is that lux and W/cm2 are not simply different units, rather they are units for different measurements.......
This is likely the result of the LabQuest desktop software not functioning as expected. To verify this, close all applications and quit the LabQuest Application......
LabQuest platforms include an internal speaker and the Audio Function Generator app. The speaker can be used to hear a waveform produced using the Audio......
In September 2012, we updated the Conductivity probe with a new calibration on each switch setting to optimize it for small improvements in the hardware.......
The LabQuest internal temperature sensor measures temperature inside the LabQuest case. Its calibration is adjusted to approximate ambient temperature, but can deviate depending on the......
This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have a LabQuest 3, see this article. If......
The High Current Sensor uses a Hall-Effect sensor to measure the current. The Hall Effect is a magnetic phenomenon, so a strong magnetic field in......
This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. If you......