Probably, but it depends on contamination. As long as there is no mold growing in the , it should still work long past the expiration......
This one of the more common forms of damage to a force sensor by a student. What happens is that if the sensor gets hit......
A Wireless Dynamics Sensor System (WDSS), , can be connected to a PASCO dynamics cart using the included base plate and hardware. The plate connects......
If the calibration screen does not respond to taps as described in: try the following: 1) Press the escape hard key (this is the......
Automatic Installation Before manually installing the driver, attempt to install the driver automatically. For instructions, see Manual Installation If automatic installation does not work, for......
An “Emboss Graph” option is available in Logger Pro version 3.8.7 and newer (Windows only). The feature has been tested on only the following embossers:......
The control knob on the Melt Station is held in place with two set screws. The drive size of the set screws is 1.5 mm.......
No. Logger Pro for Linux is no longer available for download. If you already have a copy of the software, you can continue to use......
There are two different radiation cables in circulation due to differences in radiation monitor design. They are not interchangeable, so only use the cable that......
If you are using the on a long track, you will need to adjust the emitter to the 2 m setting. The switch is located......