...using our Force Plate (FP-BTA) or Go Direct® Force Plate (GDX-FP), which measure forces up to 3500 N (787 lbs). To use a Force Plate to test the bridges in......
Tech Support Search
...pH sensor for LabQuest platforms and interfaces is made up of: Electrode Amplifier (EA-BTA) + pH Electrode BNC (PH-BNC) The following are always sold in 2 parts: Go Direct® pH......
Yes, you can. Of the various force sensors we make, the ones most suitable for a wind tunnel investigation would be our Dual-Range Force Sensor (DFS-BTA) and Go Direct® Force......
pH Sensor (PH-BTA) Specifications and User Guide Troubleshooting Primary Test: Does it read approximately 4 in its storage solution? Note: A reading of 13 to 14 indicates volts and might......
Colorimeter (COL-BTA) Specifications and User Guide TROUBLESHOOTING Primary Test: Connect the Colorimeter to a Vernier Interface. Allow the Colorimeter to warm up for 5 minutes. Place a cuvette, about 3/4......
Salinity Sensor (SAL-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Plug in the sensor and start up the data-collection program. Place the sensor in distilled water. The reading should be......
Flow Rate Sensor (FLO-BTA) Specifications and User Guide TROUBLESHOOTING Primary Test: Plug in the sensor and start up the data-collection program. Spin the impeller on the sensor and check the......
Barometer (BAR-BTA) Specifications and User Guide TROUBLESHOOTING -The Barometer measures pressure in a very small range around sea level atmospheric pressure. Make sure that the Barometer is not in a......
Relative Humidity Sensor (RH-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Plug the sensor into an interface and run the data-collection program. Check the readings on the default screen. Move......
Hand-Grip Heart Rate Monitor (HGH-BTA)Specifications and User Guide TROUBLESHOOTING -Primary Test: This sensor supports Bluetooth® low energy technology if it has a Polar Heart Rate Module. Using Bluetooth® for data......