Gas Pressure Sensor (GPS-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Plug the sensor into a Vernier interface and run the data-collection program. The units for the default readings are......
EKG Sensor (EKG-BTA) Specifications and User Guide TROUBLESHOOTING – Primary Test: The most common cause of problems with this sensor is a poor connection, either between the tabs and the......
Magnetic Field Sensor (MG-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Confirm that the setting switch on the sensor wand is appropriate for the experiment. The low amplification (6.4 mT......
UVA Sensor (UVA-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Take readings outdoors in the sunlight with and without a barrier, such as a piece of cardboard. RELATED TIL ENTRIES......
UVB Sensor (UVB-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Are you using the UVB Sensor to check UVA light? Confirm that the sensor is appropriate for the experiment. -Secondary......
...if your sensor returns parameters that you find unrealistic. The Blood Pressure Sensor (BPS-BTA) works best when you allow the data-collection software to finish collecting data. Blood pressure parameters are......
The standard Conductivity Probe (CON-BTA) has a body made of ABS plastic. The temperature element itself is housed in a stainless steel tube. The sensing element is tin and copper......
Melt Station (MLT-BTA) Specifications and User Guide TROUBLESHOOTING – Primary Test: Make sure you are using a current version of the software. Software Requirements: Logger Pro: 3.8.4 or newer Logger......
...App? 2000-2014 Sensor Booklet for 2000-2014 model: https://www.vernier.com/files/manuals/col-bta_20141205.pdf 2014-current Sensor Booklet for current model: https://www.vernier.com/manuals/col-bta The Colorimeters with the white BTA connector, available since 2000 will auto-identify when connected to......
Pressure Sensor 400 (PS400-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: Connect the sensor to a Vernier interface and run the data-collection program. The units for the default readings are......