When connecting LabQuest interface to a Windows 7 computer after installing Logger Pro, the final process for making the WinUSB device driver available to the......
When an Ion Selective Electrode (ISE) is connected to a Go Wireless Link, the attached sensor can be identified incorrectly. This happens when you have......
Specifications and User Guide TROUBLESHOOTING -Primary Test: If the probe is filled with the correct filling solution, the blue protective cap is removed, and it......
This information pertains to the original LabQuest and LabQuest 2. If you have LabQuest 3, see this article. As of April 2012, are shipping with......
Our interfaces are designed to conserve battery life whenever possible. Some sensors, such as Dissolved Oxygen, require a warm-up period and therefore use more battery......
This is a Mac OS X 10.9 and later issue only. Among the number of power-saving features that Mac OS X 10.9 introduced, the App......
When using a Digital Control Unit (DCU) with LabQuest, automatic identification of sensors is disabled for the port used by the DCU. This is because......
This information pertains to LabQuest 2. If you have an original LabQuest, see this article. If you have a LabQuest 3, see this article. For......
The long-term life of the battery will vary, but you can expect 400 to 500 full charge/discharge cycles for our LabQuest batteries before the battery......
The power button on a Go Wireless sensor is used to control the power state. – Press the button once to turn on the Go......