The calibration equations for the CO2 Gas Sensors are listed below. They are divided into the old model (square body, pre-2007) and newer model (rounded......
Arduino is an open-source physical computing platform based on a simple microcontroller board as well as a development environment for writing software for the board.......
Logger Pro installs and upgrades of version 3.13 and later on Windows 10 will frequently require a reboot to install certain files. The installer is......
The UV-VIS Spectrophotometer comes with a set of two Starna Quartz cuvettes: . The Fluorescence/UV-VIS Spectrophotometer comes with one Starna Fluorescence Quartz cuvette: These cuvettes......
The Z dimension refers to the position of the light beam transmitting through the cuvette. It is an important specification when working with small-volume samples.......
Logger Pro 3.14 and LabQuest 2.7.2 or newer remember calibration settings between mode changes, so this should not be an issue if you are using......
This combination is not officially supported. You may be able to collect data from a SpectroVis Plus (not Go Direct version) but you will likely......
You should Select Intensity Correction when comparing sources with continuum spectra (e.g., incandescent sources). Please note that this correction will only work properly if you......
For SpectroVis, SpectroVis Plus, Go Direct SpectroVis Plus, Vernier Spectrometer, Vernier UV-VIS and Vernier Fluorescence/UV-VIS: It is the pathlength of the inside of the cuvette,......
If you attempt to collect data for an inelastic collision (using the lumps of clay on the bumper launcher kit) you may find it difficult......