This depends on which version of the force plate you own.
Cannot be used with Go!Link
Revised (BTA) Force Plate
This unit requires more current than a Go!Link (GO-LINK) can provide and is therefore incompatible. A LabQuest interface (LabQuest Mini, LabQuest 3, etc.) is required.
This force plate started shipping November 10, 2023.
![](https://www.vernier.com/til/wp-content/uploads/sites/2/2023/11/image-1.png)
Go Direct Force Plate
Go Direct sensors do not require any interface.
This force plate started shipping February, 2024.
![](https://www.vernier.com/til/wp-content/uploads/sites/2/2024/01/product.gdx-fp.hero._001-1.jpg)
Can be used with Go!Link
Original Force Plate
This unit uses less current than the newer version and is compatible with a Go!Link (GO-LINK). This sensor can also be used with a LabQuest interface (LabQuest Mini, LabQuest 3, etc.).
This force plate shipped before November 10, 2023.
![](https://www.vernier.com/til/wp-content/uploads/sites/2/2023/11/product.fp-bta._hero.001-1-scaled.jpg)
Additional Resources
Force Plate Troubleshooting and FAQs
Which force plate do I have?