Combustion of a Peanut M&M
$79.00
A simple and rugged sensor designed to measure temperature in the range of –200ºC to 1400ºC. Low cost and a wide temperature range make the Thermocouple an economical, versatile temperature sensor.
This sensor uses type-K thermocouple wire to measure temperatures in the range of -200 to 1400˚C. It can be used to measure flame temperatures as high as 1400˚C, or liquid nitrogen temperatures at -196˚C. The Thermocouple has an internal ice-point compensation chip, so you do not need to place a reference wire in an ice-water bath. You can simply use one measuring lead to take temperature readings. Each Thermocouple is individually calibrated.
Choose a platform below to see its compatibility requirements.
| Interface | LabQuest App |
|---|---|
| LabQuest 3 | Full support |
| LabQuest 2 | Full support |
| LabQuest | Full support |
| Software | |||
|---|---|---|---|
| Interface | Graphical Analysis | Logger Pro (discontinued) | Logger Lite (discontinued) |
| LabQuest Mini | Full support | Full support | Full support |
| LabQuest 3 | Full support | Full support | Incompatible |
| LabQuest 2 | Full support | Full support | Full support |
| LabQuest Stream | Full support 1 | Full support | Full support 1 |
| Go!Link | Full support | Full support | Full support |
| LabQuest | Full support | Full support | Full support |
| LabPro | Incompatible | Full support | Full support |
| Software | |
|---|---|
| Interface | Graphical Analysis |
| LabQuest Mini | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 | Full support |
| LabQuest Stream | Full support 1 |
| Go!Link | Full support |
| LabQuest | Full support |
| Software | ||
|---|---|---|
| Interface | Graphical Analysis | Graphical Analysis GW |
| LabQuest Stream | Full support | Full support |
| LabQuest 3 | Full support 1 | Full support 1 |
| LabQuest 2 | Full support 1 | Full support 1 |
| Software | ||
|---|---|---|
| Interface | Graphical Analysis | Graphical Analysis GW |
| LabQuest Stream | Full support | Partial support 1 2 |
| LabQuest 3 | Full support 3 | Full support 3 |
| LabQuest 2 | Full support 3 | Full support 3 |
| Software | |
|---|---|
| Interface | Arduino |
| Vernier Arduino® Interface Shield | Full support |
| Software | |
|---|---|
| Interface | NI LabVIEW |
| SensorDAQ | Full support |
| Vernier myDAQ Adapter | Full support 1 |
| Go!Link | Full support |
| LabQuest Mini | Full support |
| LabQuest Stream | Full support |
| LabQuest 3 | Full support |
| LabQuest 2 | Full support |
| LabQuest | Full support |
| Software | |||||
|---|---|---|---|---|---|
| Interface | EasyData | DataMate | TI-84 SmartView | DataQuest | TI-Nspire Software |
| EasyLink | Full support 1 | Incompatible | Full support 2 | Partial support 3 | Partial support 2 3 |
| CBL 2 | Full support 4 | Partial support 3 4 5 | Incompatible | Incompatible | Incompatible |
| LabPro | Full support 4 | Partial support 3 4 5 | Incompatible | Incompatible | Incompatible |
| TI-Nspire Lab Cradle | Incompatible | Incompatible | Incompatible | Partial support 3 | Partial support 3 |
Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.
