Experiencing Bluetooth® issues with Go Direct® sensors on Chromebooks? Get help here.

Goniometer

Goniometer

Goniometer

$189.00

The Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity.

ORDER CODE: GNM-BTA Category

The Goniometer can be used to measure the dynamic motion of a limb during different types of physical activity.

  • A set of elastic straps are used to secure the sensor to the subject.
  • The lightweight and flexible joint arms allow the limb to move naturally.
  • Use it with a Vernier EKG sensor.
  • The sensor can also be detached from the base plate and flexible arms so it can be used in a variety of STEM and engineering activities.

WARNING: This product can expose you to chemicals, including bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov For more information, see www.P65Warnings.ca.gov

Goniometer - Tech Tips with Vernier
Goniometer - Tech Tips (7:24)

Specifications

  • Range: 0-340° (+/-170°)
  • Resolution:
    • 13-bit Typical Resolution: 0.06°
    • 12-bit Typical Resolution: 0.12°
    • 10-bit Typical Resolution: 0.5°

Requirements

Choose a platform below to see its compatibility requirements.

LabQuest
InterfaceLabQuest App
LabQuest 3Full support
LabQuest 2Full support
LabQuestFull support
Computers
Software
InterfaceGraphical AnalysisLogger Pro (discontinued)Logger Lite (discontinued)
LabQuest MiniFull supportFull supportFull support
LabQuest 3Full supportFull supportIncompatible
LabQuest 2Full supportFull supportFull support
LabQuest StreamFull support 1Full supportFull support 1
Go!LinkFull supportFull supportFull support
LabQuestFull supportFull supportFull support
LabProIncompatibleFull supportFull support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
Chromebook
Software
InterfaceGraphical Analysis
LabQuest MiniFull support
LabQuest 3Full support
LabQuest 2Full support
LabQuest StreamFull support 1
Go!LinkFull support
LabQuestFull support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
iOS
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest StreamFull supportFull support
LabQuest 3Full support 1Full support 1
LabQuest 2Full support 1Full support 1

Compatibility Notes

  1. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Android
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest StreamFull supportPartial support 1
LabQuest 3Full support 2Full support 2
LabQuest 2Full support 2Full support 2

Compatibility Notes

  1. Data can be collected using the sensor’s default calibration only.
  2. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Arduino
Software
InterfaceArduino
Vernier Arduino® Interface ShieldFull support
LabVIEW
Software
InterfaceNI LabVIEW
SensorDAQFull support
Vernier myDAQ AdapterFull support 1
Go!LinkFull support
LabQuest MiniFull support
LabQuest StreamFull support
LabQuest 3Full support
LabQuest 2Full support
LabQuestFull support

Compatibility Notes

  1. You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
Texas Instruments
Software
InterfaceEasyDataDataMateTI-84 SmartViewDataQuestTI-Nspire Software
EasyLinkFull support 1IncompatibleFull support 2Full supportFull support 2
CBL 2Full support 3Full support 3 4IncompatibleIncompatibleIncompatible
LabProFull support 3Full support 3 4IncompatibleIncompatibleIncompatible
TI-Nspire Lab CradleIncompatibleIncompatibleIncompatibleFull supportFull support

Compatibility Notes

  1. Use with TI-84 Plus calculators only.
  2. Requires an Easy to Go! adapter
  3. CBL 2 and LabPro interfaces cannot be used with TI-84 Plus CE calculators.
  4. DataMate cannot be used with color screen TI-84 Plus calculators; use EasyData with these calculators.

What's Included

  • Goniometer: joint angle sensor with base plate attached to static arm
  • 12-inch flexible joint arm
  • 10-inch flexible joint arm
  • 8-inch flexible joint arm
  • Two 24-inch elastic, hook-and-loop straps
  • Two 14-inch elastic, hook-and-loop straps

Accessories

Replacement PartOrder CodePriceQuantity
Goniometer Replacement Straps (4 elastic straps)GNM-STRAPS$15.00
Goniometer Replacement Arms (3 flexible arms)GNM-ARMS$16.00

Support

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART