Go!Temp User Manual
Order Code: GO-TEMP
Go!Temp is a USB temperature probe that can be used to collect data when connected to a computer, LabQuest®, or Chromebook™.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Vernier products are designed for educational use. Our products are not designed nor are they recommended for any industrial, medical, or commercial process such as life support, patient diagnosis, control of a manufacturing process, or industrial testing of any kind.
Compatible Software and Interfaces
Choose a platform below to see its compatibility requirements.LabQuest
Interface LabQuest App LabQuest 3 Full support LabQuest 2 (discontinued) Full support LabQuest (discontinued) Full support Computers
Software Interface Graphical Analysis Logger Pro Logger Lite No interface required Full support Full support Full support LabQuest 3 Full support 1 Incompatible Incompatible LabQuest 2 (discontinued) Full support 1 Incompatible Incompatible Compatibility Notes
Chromebook
Software Interface Graphical Analysis No interface required Full support LabQuest 3 Full support 1 LabQuest 2 (discontinued) Full support 1 Compatibility Notes
iOS
Software Interface Graphical Analysis Graphical Analysis GW LabQuest 3 Full support 1 Full support 1 LabQuest 2 (discontinued) Full support 1 Full support 1 Compatibility Notes
Android
Software Interface Graphical Analysis Graphical Analysis GW LabQuest 3 Full support 1 Full support 1 LabQuest 2 (discontinued) Full support 1 Full support 1 Compatibility Notes
LabVIEW
Software Interface NI LabVIEW No interface required Full support Texas Instruments
Software Interface EasyData TI-84 SmartView DataQuest TI-Nspire Software No interface required Full support 1 2 Full support Full support 1 Full support Compatibility Notes
Getting Started
Go!Temp with a Computer or Chromebook
- Install Graphical Analysis® software on your computer or Chromebook.
- Graphical Analysis Pro has many additional features and is available for purchase at www.vernier.com/ga
- Connect Go!Temp to the USB port.
- Start the software. Go!Temp will be recognized and will display the live temperature reading.
- Click Collect to begin collecting temperature data or open an experiment file from one of the Vernier lab books.
Go!Temp with a LabQuest
- Connect Go!Temp to the USB port on the LabQuest 3, LabQuest 2, or original LabQuest.
- Go!Temp will be recognized and will display the live temperature reading.
- Start data collection, if desired.
Specifications
Range |
–20 to 115°C |
Maximum temperature tolerated without damage to the sensor |
150°C |
Resolution |
0.07°C |
Accuracy |
0.5°C |
Response Time |
4 s (to 90% of full reading in water) |
Warranty
Vernier warrants this product to be free from defects in materials and workmanship for a period of five years from the date of shipment to the customer. This warranty does not cover damage to the product caused by abuse or improper use. This warranty covers educational institutions only.
Contact Support
Fill out our online support form or call us toll-free at 1-888-837-6437.