Experiencing Bluetooth® issues with Go Direct® sensors on Chromebooks? Get help here.
Menu

LabPro

LabPro

LabPro

LabPro

This product has been discontinued.

LabPro is a versatile sensor interface for calculator and computer data collection.

This interface is only compatible with Logger Pro software or older Texas Instruments calculators.

ORDER CODE: LABPRO Category
Categories

What's Included

  • Vernier LabPro interface
  • Calculator cable
  • Calculator cradle
  • DataMate calculator software
  • Power adapter
  • Voltage probe
  • USB computer cable
  • User manual

Compatible Sensors

Computers and Logger Pro (81 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Sensor does not auto-ID; manual setup is required.
  5. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  6. Requires a Gas Pressure Sensor
  7. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
Computers and Logger Lite (69 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. Requires a Gas Pressure Sensor
  6. Software does not support baseline adjustment.
  7. This interface/software combination auto IDs the VSMT Force sensor; displacement measurements require a Logger Lite file found at www.vernier.com/til/3621/
NI LabVIEW (2 sensors)

For All Supported Sensors

  • Sensor does not auto-ID; manual setup is required.
  • Requires advanced programming for data collection

Supported Sensors

TI Calculators and EasyData (75 sensors)

For All Supported Sensors

  • CBL 2 and LabPro interfaces cannot be used with TI-84 Plus CE calculators.

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires user-defined programs
  3. Requires a BNC electrode
  4. This software cannot apply digital filters to EKG data.
  5. Requires a Heart Rate Receiver to connect to an interface
  6. Software does not support the Data Tagging feature that is typically used with this sensor.
  7. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  8. Requires a Gas Pressure Sensor
  9. EasyData and DataMate do not support this sensor. Use DaRotary (not supported on color screen TI-84 Plus calculators).
  10. Software does not support baseline adjustment.
  11. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
  12. Software cannot calculate resistance or power data.
  13. Sensor does not auto-ID; manual setup is required.
  14. EasyData and DataMate do not support this sensor. Use DataRad (not supported on color screen TI-84 Plus calculators).
  15. This interface/software combination can only collect force data; displacement measurements are not supported.
TI Calculators and DataMate (71 sensors)

For All Supported Sensors

  • DataMate cannot be used with color screen TI-84 Plus calculators; use EasyData with these calculators.
  • CBL 2 and LabPro interfaces cannot be used with TI-84 Plus CE calculators.

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires user-defined programs
  3. Requires a BNC electrode
  4. This software cannot apply digital filters to EKG data.
  5. Requires a Heart Rate Receiver to connect to an interface
  6. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  7. Requires a Gas Pressure Sensor
  8. EasyData and DataMate do not support this sensor. Use DaRotary (not supported on color screen TI-84 Plus calculators).
  9. Software does not support baseline adjustment.
  10. Currently shipping Thermocouples (Model: TCA1816R3) use a calibration type not supported with this software. Older models of the sensor are fully supported. No software update is planned.
  11. DataMate does not support this sensor. Use EasyData app with all TI-83/84 Plus calculators; otherwise, use DataGate.
  12. DataMate does not support this sensor. Use EasyData app with all TI-83/84 Plus calculators; otherwise, use DataDrop.
  13. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
  14. Software cannot calculate resistance or power data.
  15. EasyData and DataMate do not support this sensor. Use DataRad (not supported on color screen TI-84 Plus calculators).
  16. This interface/software combination can only collect force data; displacement measurements are not supported.

Replacement Parts

Replacement PartOrder CodePriceQuantity
Power Supply for LabPro, WDSS, and Stir StationIPS$12.00
USB A to B CableCB-USB$5.00

Support

Resources

Replacement Parts

Contact Us

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART