The Qubit GSR (Galvanic Skin Response) Sensor measures the psycho-galvanic reflex. This reflex generates a change in skin conductivity during periods of stress, excitement, or shock and is used as a measure of sympathetic nervous system activity. This sensor monitors the conductivity of the skin between two disposable tab electrodes that are placed on two adjacent fingers of one hand. This sensor can monitor both rapid and slow changes in skin conductivity, making it ideal for studies involving shock, arousal, and biofeedback.
Qubit GSR Sensor
Increase in skin conductivity during a breath hold
Qubit GSR Sensor
$1,250.00
The Qubit GSR (Galvanic Skin Response) Sensor measures the psycho-galvanic reflex. This reflex generates a change in skin conductivity during periods of stress, excitement, or shock.
Specifications
- Units: µS (microsiemens)
- Range:
- High: 0–40 µS
- Low: 0–5 µS
- Offset: 5 µS range can be offset by 0–40 µS
- Accuracy: 0.5% of full scale range or better
- Gain:
- High Range: 1980
- Low Range: 15840
- Resolution:
- High Range: 0.01 µS
- Low Range: 0.0012 µS
- Frequency Response: 0–7.2 Hz
Requirements
Choose a platform below to see its compatibility requirements.
LabQuest
| Interface | LabQuest App |
|---|---|
| LabQuest 3 | Full support 1 |
| LabQuest 2 (discontinued) | Full support 1 |
| LabQuest (discontinued) | Incompatible |
Compatibility Notes
- Sensor does not auto-ID; manual setup is required.
Computers
| Software | |
|---|---|
| Interface | Logger Pro |
| LabQuest Mini | Full support 1 |
| LabQuest 3 | Full support 1 |
| LabQuest 2 (discontinued) | Full support 1 |
| LabQuest Stream (discontinued) | Full support 1 |
| LabQuest (discontinued) | Full support 1 |
| LabPro (discontinued) | Full support 1 |
Compatibility Notes
- Sensor does not auto-ID; manual setup is required.
Arduino
| Software | |
|---|---|
| Interface | Arduino |
| Vernier Arduino® Interface Shield | Full support 1 2 |
Compatibility Notes
- You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
- Requires advanced programming for data collection
LabVIEW
| Software | |
|---|---|
| Interface | NI LabVIEW |
| SensorDAQ (discontinued) | Full support 1 |
| Vernier myDAQ Adapter | Full support 1 2 |
| LabQuest Mini | Full support 1 3 |
Compatibility Notes
- Requires advanced programming for data collection
- You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
- Sensor does not auto-ID; manual setup is required.
What's Included
- Qubit GSR Sensor
- Power supply
- One package of 100 disposable electrodes
- USB drive with user manual
Accessories
Support
Warranty
5-year limited warranty (consumables excluded)
See our warranty policy
Contact Us
- Recommended: Online Support
- Email: support@vernier.com
- Toll-free: 1-888-837-6437
Related Products
-
Qubit EKG/EMG Sensor
$1,000.00 -
Hand Dynamometer
$124.00 -
Surface Temperature Sensor
$34.00 -
Goniometer
$189.00 -
Hand-Grip Heart Rate Monitor
$129.00 -
Spirometer
$240.00
Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.